Although connecting to the Internet may seem simple, it can be a difficult task if you are not familiar with the network or the type of Internet you are connecting to. However, in today’s world it is essential to know how to connect to a network. So whether you’re using Wi-Fi, Ethernet, or dial-up, connecting to the Internet is a task that we all need to learn. Next we explain the different ones that exist to connect to a network. Take note of the steps!
Connection via Wi-Fi network
The first thing you will have to do is check that the internet source (the router) is turned on. Although it may seem obvious, it is a common mistake that is made often, especially if a router or modem has just been configured. Therefore, it is essential that you make sure that it is turned on and that everything is plugged in correctly.
Next, you will have to check that your device has the Wi-Fi connection activated. Make sure your computer or mobile phone does not have the Wifi turned off before continuing. Afterwards, you will need to access your device’s settings. To do this, if you are on a mobile, go to ‘settings’ and open it to modify the network. If you are using a computer, click the Wi-Fi icon in the toolbar to open a drop-down menu. All available connections will appear in this menu.
Then you will have to find the name of your Wifi network. Usually the router has a default name written on it, although this can be changed. If you’ve changed the name of your network, you can probably recognize it. After completing this step, you will have to enter the network password. This password will appear on the router, although if you don’t know it you can ask the person in charge of the network.
You will have to wait a few seconds for the computer to connect. Once you have connected to the Internet you will have to open a page in a web browser and wait for it to load . If the connection works for you, you will not have to do any more steps. However, your computer may not be able to connect to the wireless connection. Some of the most common problems are that the Internet is too slow, or that the network is out of reach.
Via an Ethernet network
The first thing you will need is an Ethernet cable and the necessary adapters. Also, some modern devices can connect directly to the router via an Ethernet cable, although not all can. Next, you will need to connect one end of the Ethernet cable to the broadband source. Generally, the broadband source is a router, although in some cases it may be a modem.
Next you must access the configuration of your computer. It is essential that you make sure that the computer is configured to recognize the Ethernet connection instead of the wireless one. Next, you will need to check your internet connection. Open a web page in a browser and check that it loads. If everything went well, you should already have an Internet connection. Also, although the Ethernet connection is more secure than Wi-Fi, that does not mean that you cannot have connection problems.
By dial-up
The dial-up connection is not the best solution, since it stopped being used when broadband arrived. Also, you may only be able to browse simple web pages without many images or features. Therefore, if you want to surf the Internet, it is best to look for a Wi-Fi access point.
The first thing to do is make sure that you can connect to dial-up. This requires a phone line and only one person can connect on the phone at the same time. After this step, you must connect the modem to the telephone socket. It is important that you verify that the telephone cord is plugged into both the telephone wall jack and the modem jack. Next, you will need to connect the modem to your computer by inserting one end of the cable into the modem and the other end into the computer’s modem connector.
Next you will have to access the network configuration of your computer. From there, you will need to configure the dial-up connection. You will need to enter the dial-up phone number, username, and password. If you have done the configuration correctly, you will have to open the network settings and connect to the modem. You must enter the phone number, username and password.
Finally, you will have to check the Internet connection. To make sure the internet works, open a web page and wait for it to load. However, you must bear in mind that this connection is much slower.
