Although most people buy their laptop from a store, you may prefer to build it yourself. Also, the price of laptops is usually quite high and they almost never include all the functions you want. Without a doubt, building your own computer will be a challenge, although it will surely be very rewarding. Here’s how to build your own laptop step by step. Take note!
How will you use the laptop?
A laptop for office applications will have very different specifications than a laptop for video games. You will have to take into account the battery life, since you do not want to have it permanently plugged in. Next, you will need to choose a processor that suits your needs. Ideally, you should compare processor models to determine which one offers the best speed.
There are currently two main computer manufacturers: Intel and AMD. You will need to research both processor models to make sure you choose the right one.
Buy the materials
You will have to choose the case for your laptop, which will come with the motherboard already attached. You should also take into account the size of the screen and the keyboard layout, as a larger laptop will be more difficult to transport.
Next, you will have to buy memory and a hard drive. The memory will run your laptop. Also, for your laptop to have optimal performance it should be between eight and sixteen gigabytes. The hard drive should also have enough space for you to use it normally.
You will also have to decide if you need a dedicated graphics card and an optical drive. The graphics card is necessary for graphic designers and video game players, while the optical drive is useful if disk memory is used frequently. Finally, you will have to choose a battery. This should be the correct shape and use the same connector.
Put all the pieces together
Before starting you will have to get all the tools. You will need a set of screwdrivers, tortillos, and needle-nose pliers. You will then need to wear an antistatic wrist strap to avoid electrostatic discharge. Flip the computer over so the bottom is facing up, accessing the motherboard from several removable plates.
Next, you will need to remove the panel that covers the drive bay. The location varies by case, but is usually located on the front of the laptop. After this step you will have to mount the hard drive on the bracket. Use four tortillos to make sure it sets properly.
Next, you will need to slide the hard drive between the brackets in the bay. Use a grip tape to apply enough pressure. Also, you should also place tortillos so that it is as tight as possible. Next, you will have to install the optical drive. Installation will vary depending on the case.
